Home About Us Design Products Manufacturing Services

Request Form:

Your Name

Company

Street Address


City

State

Zip Code

Country

E-Mail Address

Telephone Number

Fax Number

 

Dimensional Considerations:

1.) What are your tank dimensions?
..........Tank depth?... .
..........Tank length?.. .
..........Tank width?.....
.
2.) What is your acid depth?
.
3.) What is the height from the lifting device point of contact (to bail) above tank top (maximum)?...
.
4.) What is the crane trolley travel distance along the length of the hook?
.

5.) What is your crane capacity (less lifting device)?
.
6.) What are your coil dimensions?
..........Coil outside diameter?... .
..........Coil inside diameter?.. ....
..........Coil width (hook contact service area)?.....
. ........Coil wrapping?.....
.

7.) What is the number of coils on each hook?
.
8). What is the maximum gross weight per coil?
.

9.) Please describe saddle details, radius, style, etc. Do you have a sketch you can provide?
Handling Considerations:

10.) How will your coils be loaded onto the pickling hook? Please describe.

11.) How will your coils be unloaded from the pickling hook? Please describe.

12.) What percent of the time will your pickling hooks be in the acid?
.
13.) How many shifts per day?
.
14.) How many pickling hooks will be in each tank?
.
15.) Are your coils every stored outside?..
.

Process Considerations:
16.) What is your acid type?
.
17.) What is your acid concentration?
.
18.) What is your acid temperature (maximum)?
.

19.) How do you measure your acid temperature?
20.) What is the maximum temperature of coil material entering the acid?
.
21.) Is the acid agitated? ..
22.) Is the acid aerated? ..
23.) How often is the acid replaced?
.
24.) Do you have a cascade system? ..
25.) Are inhibitors used? ..
26.) Is the spreader pipe rinsed of acid in the process? ..
27.) Does the pickling hook go into a baker? ..
.......If so, what is the temperature? ..
28.) Is rock salt used? ..
29.) Are the coils rolled on the hook to clean contact points on the wire/rod?
......
......If so, how is it done? .
.....
30.) Is there a forced air fume evacuation system in place? ..
.......If so, please list the other tanks in the line in order that the hooks enter them:
Tank no. 1..
..........Contents?.............
..........Concentration?.....
..........Temperature?.......
..........Rinse?.................
.
Tank no. 2..
..........Contents?.............
..........Concentration?.....
..........Temperature?.......
..........Rinse?.................
.
Tank no. 3..
..........Contents?.............
..........Concentration?.....
..........Temperature?.......
..........Rinse?.................
.
Tank no. 4..
..........Contents?.............
..........Concentration?.....
..........Temperature?.......
..........Rinse?.................
.
Tank no. 5..
..........Contents?.............
..........Concentration?.....
..........Temperature?.......
..........Rinse?<.................
.
Tank no. 6..
..........Contents?.............
..........Concentration?.....
..........Temperature?.......
..........Rinse?.................
.
Product Data:

31.) What are the material grades you produce?

32.) What are the rod / wire diameters you produce?

33.) What is the surface condition desired?


.

34.) What are the coatings used?

35.) In what way may The Alloy Engineering Company help you?


 
Home   About Us   Design   Products   Manufacturing   Services   Ask Us   Customer Login