skip to Main Content

Alloy Engineering is committed to meeting our customers’ needs by staying at the forefront of manufacturing innovations and having state-of-the-art equipment in both of our facilities.

To that end, we offer customers:

  • CNC Horizontal Boring Mill 168” Capacity
  •  Large Turning 84” Ø x 37’ OA
  • CNC Lathe 80” Ø x 14’ OAL•
  • Vertical Turning Lathes up to 110” Capacity x 66” H
  • Milling Machines, Drill Presses, Grinders
  • Saws
  • Pipe End Machining
  • Niles A60: 84 inch swing over ways, 68 inch swing over carriage, part length 37-1/2 feet, dual carriages
  • American: 62 inch swing over ways, 48 inch swing over carriage, max part length 35 feet, dual carriages
  • LeBlond: 50 inch swing over ways, 36 inch swing over carriage, max part length 28 feet
  • LeBlond: 40 inch swing over ways, 22 inch swing over carriage, max part length 12 feet
  • Monarch: 42 inch swing over ways, 28 inch swing over carriage, part length 21 feet, metric threading
  • All lathes have digital readouts, multiple steady rests, and many combinations of lead gearing
  • You-Ji VTL – 38.00” OD Swing x 16.00” vertical travel
  • Binns & Berry CNC Lathe – 40.00” OD Swing X 290.00” Long
  • American Tool Works CNC Lathe: 80 inch swing over ways, 62 inch swing over carriage, part length 14 feet, Fagor controls.
  • Johnford CNC horizontal lathe with 32 inch chuck, max part length 76 inches, tailstock
  • Giddings & Lewis floor table with 6 inch spindle: travel is 11 feet vertical, 14 feet horizontal, floor table is 8 X 16 feet
  • Giddings & Lewis 5 inch spindle: travel is 7 feet vertical, 11 feet horizontal, table is 5 X 12 feet
  • Giddings & Lewis 5 inch spindle: travel is 6 feet vertical, 9 feet horizontal, table is 5 X 11 feet
  • All mills have digital readouts; right angle milling heads, G & L power tailstock column for boring
  • 10 ton bridge crane
  • 25 ton bridge crane
  • Giddings & Lewis CNC horizontal mill: 6 inch spindle, travel is 10 feet vertical, 12 feet horizontal, reach is 5 feet.
  • Weight limit on table 40,000 lbs. distributed
  • Froriep VTL with hydraulic tracer: 98 inch diameter table, 110 inch swing
  • AWS D1.1, D1.6, D14.6, D14.1, D9.1, D17.1
  • ASME Section IX
  • Strip Clad welding
  • Shaft repair

By bringing these machining capabilities in-house instead of relying on a third party, we can offer our customers complete control over quality and unusually quick turnaround that shaves days off a project for our customers.

Contact us to learn more about Alloy Engineering’s machining capabilities or to request a quote.

Request a Quote

Back To Top